Power side view mirrors (if equipped), Driver controls – FORD 2008 F-550 v.4 User Manual

Page 104

Advertising
background image

Automatic dimming inside rear view mirror (if equipped)

Your vehicle may be equipped with
an inside rear view mirror which has
an auto-dimming function. The
electronic day/night mirror will
change from the normal (high
reflective) state to the non-glare
(darkened) state when bright lights (glare) reach the mirror. When the
mirror detects bright light from behind the vehicle, it will automatically
adjust (darken) to minimize glare.

The mirror will automatically return to the normal state whenever the
vehicle is placed in R (Reverse) (when the mirror is on) to ensure a
bright clear view when backing up.

Do not block the sensors on the front and back of the inside rear
view mirror since this may impair proper mirror performance.

Do not clean the housing or glass of any mirror with harsh
abrasives, fuel or other petroleum-based cleaning products.

Note: If equipped with a Reverse Camera System (RCS), a video image
will display in the mirror when the vehicle is put in (R) Reverse. Refer to
Reverse Camera System (RCS) in the Driving chapter.

POWER SIDE VIEW MIRRORS (IF EQUIPPED)

To adjust your mirrors:

1. Rotate the control clockwise to
adjust the right mirror and rotate
the control counterclockwise to
adjust the left mirror.

2. Move the control in the direction
you wish to tilt the mirror.

3. Return to the center position to lock mirrors in place.

The spotter mirror below the main glass (if equipped) must be adjusted
manually.

2008 F-250/350/450/550 (f23)
Owners Guide (post-2002-fmt)
USA
(fus)

Driver Controls

104

Advertising
This manual is related to the following products: