Telescoping mirrors (if equipped), Memory mirrors (if equipped), Driver controls – FORD 2008 F-550 v.4 User Manual

Page 107

Advertising
background image

Note: If the power fold/telescope mirror glass appears loose or vibrates
when driving, it is possible that the mirrors have been manually folded or
telescoped. To minimize the vibration, ensure that the mirrors are
electronically folded and telescoped in/out with the switches on the door
trim panel.

Telescoping mirrors (if equipped)

The telescoping feature allows the
mirror to extend approximately 2.75
inches (70 mm). This feature is
especially useful to the driver when
towing a trailer. Mirrors can be
manually pulled out or pushed in to
the desired telescopic position.

If equipped with power telescoping
mirrors, you can simultaneously
position both mirrors using the
power telescope switch found on
the door trim panel.
• To telescope the mirrors

outboard, press and hold the left
side of the power telescope
switch until the mirrors reach their desired position. When the end of
travel is reached, it is normal to hear the power telescoping motors
running as long as you continue to hold the switch.

• To telescope the mirrors inboard, press and hold the right side of the

power telescope switch until the mirrors reach their desired position.

Memory mirrors (if equipped)

This system allows automatic positioning of the outside rearview mirrors.
For more information on this feature, refer to Memory seats/power
mirrors/adjustable pedals
in the Seating and Safety Restraints
chapter.

2008 F-250/350/450/550 (f23)
Owners Guide (post-2002-fmt)
USA
(fus)

Driver Controls

107

Advertising
This manual is related to the following products: