Using the n (neutral) position, Positions of the electronic shift system, Driving – FORD 2007 F-550 v.2 User Manual

Page 194

Advertising
background image

Using the N (Neutral) position

The transfer case neutral position overrides the transmission and
puts the vehicle in neutral regardless of transmission gearshift
lever position. The vehicle can move forward or backwards.

This position should only be used
when towing the vehicle.

Do not leave the vehicle unattended with the transfer case in the
N (Neutral) position. Always set the parking brake fully and turn

off the ignition when leaving the vehicle.

Using the Electronic Shift On the Fly (ESOF) 4WD system
(if equipped)

Positions of the electronic shift system

The electronic shift 4WD system is designed to allow up to
45 seconds before a shift command is performed. In the event
that conflicting shift commands are selected, allow up to
45 seconds for the shift command to be performed prior to
reporting any shift concerns to your authorized dealer.

Note: Some noise may be heard as the 4WD system shifts or engages.
This is normal.

2H (2WD High) – For general on-road driving. Sends power to the rear
wheels only.

4H (4WD High) – For winter and off-road conditions. Sends power to
front and rear wheels.

4L (4WD Low) – For low-speed off-road applications that require extra
power such as steep grades, deep sand or pulling a boat out of the water.
Sends power to front and rear wheels.

2H
4H

4L

N

2007 F-250/350/450/550 (f23)
Owners Guide (post-2002-fmt)
USA
(fus)

Driving

194

Advertising
This manual is related to the following products: