Baumer HXG cameras - Manual

Safety
Further Information
For further information on our products visit www.baumer.com
For technical issues, please contact our technical support:
[email protected]· Phone +49 (0)3528 4386-0 · Fax +49 (0)3528 4386-86
© Baumer Optronic GmbH · Badstrasse 30 · DE-01454 Radeberg, Germany
Technical data has been fully checked, but accuracy of printed matter not guaranteed.
Subject to change without notice. Printed in Germany v1.6 07/13. 11086858
FCC – Class A device
N ote : This equipment has been tested and found to
comply with the limits for a Class A digital device, pursu-
ant to part 15 of the FCC Rules. These limits are designed
to provide reasonable protection against harmful interfer-
ence in a residential environment. This equipment gener-
ates, uses, and can radiate radio frequency energy and, if
not installed and used in accordance with the instructions,
may cause harmful interference to radio communications.
However, there is no guarantee that interference will not
occure in a particular installation. If this equipment does
cause harmful interference to radio or television reception,
which can be determined by turning the equipment off an
on, the user is encouraged to try to correct the interference
by one or more of the following measures:
Reorient or relocate the receiving antenna. ▪
Increase the separation between the equipment and the ▪
receiver.
Connect the equipment into an outlet on a circuit different ▪
from that to which the receiver is connected.
Consult the dealer or an experienced radio/TV technician ▪
for help.
Conformity:
CE, FCC Part 15 Class A, RoHS
Safety instructions
Notice
See User´s Guide for the com-
plete safety instructions!
Protect the sensor from dirt and ▪
moisture.
Never open the camera housing. ▪
Avoid camera contamination by ▪
foreign objects.
Environmental requirements:
Storage temp.
-10°C ... +70°C
Operating temp. +5°C ... +50°C
Housing temp. max. +50°C
Humidity 10 % ... 90 %
non-condensing
Quick Start Guide
HXG cameras with CMOS sensors (Release 2)
Product Specification
HXG cameras – Maximum Performance with CMOSIS sensors
Dual Gigabit Ethernet progressive scan CMOS camera ▪
Binning, subsampling, true partial scan function (ROI) for increased frame rates ▪
High Dynamic Range (HDR) image acquisition ▪
External synchronization via industrial compliant process interface (trigger / flash) ▪
Global shutter architecture for minimized motion blur ▪
Power over Ethernet support ▪
Standard RJ45 connectors ▪
GigE Vision ▪ TM standard compliant
Excellent image quality ▪
Camera parameter programmable in real-time ▪
Frame rates up to 105 fps (HXG20 / Monochrome) ▪
Camera Type
Sensor
Size
Resolution
Full Frames
[max. fps]
Burst Mode
(buffered)
Monochrome
HXG20 2/3“ 2048 x 1088 105 337
HXG20NIR 2/3“ 2048 x 1088 105 337
HXG40 1“ 2048 x 2048 56 180
HXG40NIR 1“ 2048 x 2048 56 180
Color
HXG20 2/3“ 2048 x 1088 105 337
HXG40 1“ 2048 x 2048 56 180
Installation
open wire
Installation sample without PoE
1 - network interface card
2 - network cable
3 - Process interface cable
4 - Power cable
Dimensions
● HXG-F (F-Mount version)
36 26
26 36
16 x M3 depth 6
UNC 1/4-20
52
52
26 36
55
5
12,5
10
Dimensions
● HXG (C-Mount version)
52
52
26 36
UNC 1/4 - 20
26 36
16xM3 deph 5
26 36
54,7
open wire
4
open wire
5
4
Installation sample with PoE via NIC
1 - PoE network interface card (NIC)
2 - network cable (PoE)
3 - network cable (without PoE)
4 - Process interface cable
Installation sample with PoE via Injector
1 - network interface card (NIC)
2 - network cable (without PoE)
3 - Injector
4 - network cable (with PoE)
5 - Process interface cable
Latest software version and technical
documentation are available at:
www.baumer.com/vision/login