Canon LV-7275 EN User Manual
Canon Projectors
Advertising
MULTIMEDIA PROJECTOR
LV-7375
LV-7370
LV-7275
LV-8300
User’s Manual
The projector's model name indicated on the projector's label are
LV-7375, LV-7375(E),LV-7370, LV-7370(E), LV-7275, LV-7275(E),
LV-8300 and LV-8300(E) respectively.
The models are referred to as LV-7375,LV-7370, LV-7275, and
LV-8300 throughout the user's manual except some of the specifica-
tions pages.
ENG
Advertising
This manual is related to the following products:
Table of contents
Document Outline
- INDEX
- Front cover
- Important Information
- Table of Contents
- 1. Introduction
- 2. Installation and Connections
- (1) Setting Up the Screen and the Projector
- (2) Making Connections
- Enabling the computer’s external display
- Connecting Your PC or Macintosh Computer
- When Viewing a DVI Digital Signal
- Using Two Analog Computer Inputs Simultaneously
- Connecting an External Monitor
- Connecting Your Audio-Video Equipment with Component Output
- Connecting Your Audio-Video Equipment with Video/S-Video Output
- Connecting a Digital Video Signal
- Connecting to a Network
- Connecting the Supplied Power Cord
- 3. Projecting an Image (Basic Operation)
- 4. Convenient Features
- 5. Using On-Screen Menu
- (1) Using the Menus
- (2) Menu Elements
- (3) List of Menu Items
- (4) Menu Descriptions & Functions [Input]
- (5) Menu Descriptions & Functions [Adjustment]
- [Image]
- [Input signal]
- Adjusting Clock and Phase [Clock/Tracking]
- Adjusting Horizontal/Vertical Position [Horizontal position/Vertical position]
- Selecting Overscan Percentage [Overscan]
- Selecting Aspect Ratio [Aspect]
- Adjusting the Vertical Position of Image [D.image shift] (not available on LV-8300)
- Selecting Video Filter Level [Video filter] (not available for Digital RGB, Video and S-Video)
- (6) Menu Descriptions & Functions [Setup]
- [General]
- Enabling Auto Keystone [Auto keystone]
- Correcting Vertical Keystone Distortion Manually [Keystone adjustment]
- Saving Vertical Keystone Correction [Keystone save]
- Selecting Wall Color Correction Mode [Screen color]
- Selecting Lamp Mode [Lamp mode]
- Setting Closed Caption [Closed caption]
- Selecting Menu Language [Language]
- [Menu]
- [Installation]
- [Options (1)]
- [Options (2)]
- [General]
- (7) Menu Descriptions & Functions [Information]
- (8) Menu Descriptions & Functions [Reset]
- Resetting settings and adjustments [Reset]
- Clearing adjustments and settings for the current signal [Current signal]
- Clearing all the adjustments and settings [All data]
- Clearing Networking Settings [Network settings]
- Clearing Lamp Hour Meter [Lamp counter]
- Clearing the Filter Usage Hours [Filter counter]
- 6. Maintenance
- 7. Appendix