FRIGIDAIRE FFTR1022QW - Manual (Page 6)

6
1
Hinge Cover
Top Hinge
Top Hinge
Shim
Top Cap
Insert
Middle
Hinge
Replace
Door
Center
Hinge
Center
Hinge
Shim
Step 6
Place the refrigerator door on the bottom left hinge.
Ensure the door is aligned horizontally and vertically.
Attach middle hinge to top (left) of refrigerator door,
attach shim to the back of hinge, align with holes and
affix to middle beam with reserved screws. Fasten with
screwdriver (not included).
Step 7
Place the freezer door on the middle hinge. Ensure that
the door is aligned horizontally and vertically, and that the
gasket seals on all sides before attaching the top hinge.
Attach the top hinge and shim and replace the hinge cover
and top cap.
2
2
2
3
3
3
Freezer
Door
Refrigerator
Door
Step 5
Remove right pin assemblies from the bottom of the
freezer and refrigerator doors. On the opposite side,
attach the replacement pin assemblies (located in
the plastic bag with the Use and Care Manual) with a
screwdriver. Note: You must re-use the screws from
the pin assemblies that are removed in this step when
attaching the new assemblies.
DOOR REVERSAL INSTRUCTIONS