Specifying the auto clear mode for auto log off, 2 specifying the auto clear mode for auto log off – Canon Authorized Sen for ImageRUNNER Machines Version 4.1 User Manual

Page 140

Advertising
background image

140

Authorized Send Installation and Configuration Guide for imageRUNNER Machines

4.2 Specifying the Auto Clear Mode for Auto Log Off


If the machine is idle for a certain period of time (after a scan to e-mail, scan to fax, or
scan to folder key operation or job), you will be logged off of Authorized Send. This
period of time is called the "Auto Clear Time."

The Auto Clear Time mode can be set from ‘0’ to ‘9’ minutes in 1 minute increments,
and can also be set to ‘Off’.

NOTE

• If [0] is selected, the Auto Clear Time mode is not set.

• The default setting is ‘2’ minutes.

1. On the machine’s control panel, press (Additional Functions).

2. Press [Timer Settings].

Advertising