Canon Authorized Sen for ImageRUNNER Machines Version 4.1 - Manual (Page 152)

152 Authorized Send Installation and Configuration Guide for imageRUNNER Machines
6.1 Configuration Screen Error Messages
Configuration screen messages are displayed on the Configuration screen of the
Authorized Send Configuration servlet. If an error occurs during the configuration
process, it is displayed in the body of the Configuration servlet screen, and is listed
here.
6.1.1 Authentication Servers Screen Error Message
This section explains the Authentication Servers screen error message, along with a
possible cause and remedy. For more information on the remedy, see
“Creating an
Authentication Server,” on p. 49.
Message Cause Remedy
Maximum authentication
servers have been created. To
create a new authentication
server, you have to delete the
old one(s) first.
The maximum number of 10
authentication servers has been
created.
Delete the old
authentication server(s)
first, and make sure you do
not exceed 10 servers in
total.
6.1.2 Create/Update Authentication Server Screen Error
Messages
This section explains the Create Authentication Server and Update Authentication
Server screen error messages, along with possible causes and remedies. For more
information on the remedies, see
“Creating an Authentication Server,” on p. 49, and
“Editing an Authentication Server,” on p. 62.
Message Cause Remedy
Authentication Host is
missing.
The [Host] text box is blank.
Enter the DNS name or IP
address of the
authentication server.
Authentication Port is missing.
The [Port] text box is blank.
Enter the numeric value for
the connecting port number
of the authentication server.
Authentication Port has to be
a number.
A non-numeric value is entered
in the [Port] text box.
Enter the numeric value for
the connecting port number
of the authentication server.
Authentication Port cannot be
zero. Zero is entered in the [Port] text
box.
Enter the numeric value
greater than zero for the
connecting port number of
the authentication server.