Scan to folder notification messages, Scan to folder error messages, 3 scan to folder notification messages – Canon Authorized Sen for ImageRUNNER Machines Version 4.1 User Manual

Page 176: 4 scan to folder error messages

Advertising
background image

176

Authorized Send Installation and Configuration Guide for imageRUNNER Machines

6.6.3 SCAN TO FOLDER Notification Messages


This section explains the SCAN TO FOLDER notification messages, along with
possible causes and remedies.

Message

Cause

Remedy

Checking access to [share]
share…

The MEAP device is attempting to
acquire sufficient read privileges.

Not applicable.

Validating File Server and
File Path…

The MEAP device is validating
correct formatting of the file server
and file path.

Not applicable.

6.6.4 SCAN TO FOLDER Error Messages


This section explains the SCAN TO FOLDER error messages, along with possible
causes and remedies.

Message

Cause

Remedy

Specified share is
inaccessible. Please enter
or select another.

The MEAP device cannot acquire
sufficient read privileges to the
specified file path on the specified
file server.

Verify that the share exists
and that sufficient privileges
have been configured.

Home Directory is not
configured. Contact
administrator.

The [Scan to Home
Directory/Preselected Share only]
check box is selected in the
Configuration servlet, and the user
has no Home Directory configured
in Active Directory.

• Verify that the user has a

Home Directory configured
in Active Directory, or

• Clear the check mark from

the [Scan to Home
Directory/Preselected
Share only] check box.

No share is pre-selected.
Contact administrator.

The [Scan to Home
Directory/Preselected Share only]
check box is selected in the
Configuration servlet, and no
preselected share is selected from
the Preselected Share drop-down
list.

• Select or configure a

preselected share in the
Configuration servlet, or

• Clear the check mark from

the [Scan to Home
Directory/Preselected
Share only] check box.

No share can be selected.
Contact administrator.

The [File Server/Path] and
[Browse] check boxes in the
<Disabled> column are selected in
the Configuration servlet, and no
preset shares have been created.

• Create a preset share in the

Configuration servlet, or

• Clear the check marks from

the [File Server/Path] and
[Browse] check boxes in
the <Disabled> column.
See

“Configuring Scan to

Folder Settings,”

on p. 100.

Advertising