FRIGIDAIRE FRA064ZU1 - Manual (Page 5)

5
Installation Instructions
Complete Installation:
1. Insert window sash seal behind the top of the lower window sash and against
the glass of the upper window (FIG.15).
2. Place the window-lock bracket on top of lower window and against upper
window sash on right side of the window (FIG.15).
8VHDƎGULOOELWWRGULOOVWDUWHUKROHVWKURXJKWKHKROHVLQWKHEUDFNHWLQWR
the window sash (FIG.15).
$WWDFKWKHZLQGRZORFNEUDFNHWWRWKHZLQGRZVDVKZLWKWZR;Ǝ
round-head screws to secure window in place (FIG.15).
5. Insert air conditioner into cabinet (FIG.16).
6. Reconnect electronics plug if present. Insert front tabs of front panel into top of
cabinet and swing front into place (FIG.17A).
7. Attach bottom front of panel with front panel screws (FIG.17B).
8. Plug into a grounded 3 prong outlet.
9. Press RESET on the power supply cord.
A. Window lock bracket
B. Upper window glass
C. Window sash seal
';ƎURXQGKHDG
screws
Through-the-Wall Cabinet Installation:
Option 1—wood, metal or plastic molding:
When using a wood, metal or plastic molding, the wood frame should line up with the inside wall as shown FIG.18.
Option 2—Plastered wall with no molding:
,IWKHSODVWHUHGZDOOLVWREHIOXVKZLWKWKHFDELQHWDQGQRPROGLQJLVXVHGWKHZRRGIUDPHPXVWEHVHWƎ PP 
into the inside wall FIG.19.
A B C
D
A. Molding
B. Inside wall C. Wood frame
D. Louvers
A B C
D
A. Plastered wall
B. Inside wall C. Wood frame
D. Louvers
3. Cut the opening through the wall. Remove and save insulation.
4. Apply the wood preservative to the outside exposed surface.
5. Insert the frame in the wall opening. Square and level frame.
6. Attach frame securely to the wall.
FIG.18 FIG.19
:LGWK Ǝ FP SOXVWZLFHWKLFNQHVVRIZRRGXVHGWREXLOGIUDPH
+HLJKW Ǝ FP SOXVWZLFHWKLFNQHVVRIZRRGXVHGWREXLOGIUDPH
'HSWK Ǝ FP PLQLPXPWRƎ FP PD[LPXP
A
B
C
C
D
FIG.20
FIG.16 FIG.17A FIG.17B
$Ǝ FP
%Ǝ FP
C. Wood thickness
'Ǝ FP PLQLPXPWR
Ǝ FP PD[LPXP
1. Construct the wood frame. See FIG.20 for dimensions.
2. Measure the outside width and height of frame to determine wall opening dimensions. The wall opening
measurements should be :
Install Wood Frame:
A
FIG.15
B
C
D
electronics plug