Cisco SFS 7008 - Manual (Page 23)

23
4. Determine the direction that the switch will be installed and justified in the rack. The direction that
the switch will be justified will determine which set of rack ears that need to be removed.
5. Use a #2 phillips screwdriver to remove one set of rack ears:
• If you have determined that the switch will be justified toward the front of the rack, then use a
#2 phillips screwdriver to unscrew the rack ears from the back of the switch.
• If you have determined that the switch will be justified toward the back of the rack, then use a
#2 phillips screwdriver to unscrew the rack ears from the front of the switch.
Figure 2-2: Unscrew Extra Rack Ears from the Chassis
6. Separate the rack ears from the chassis when all screws have been loosened.