Cisco SFS 7008 - Manual (Page 46)

46
3. Remove the InfiniBand cables from the ports.
a. To remove a cable with a pinch connector, pinch both sides of the back of the connector and
pull the connector away from the port.
Figure 3-12: Removing a Pinch-Type Connector
b. To remove a cable with a pull connector, grasp the connector with one hand and push it toward
the port, then pull the latch away from the port with your other hand and gently wiggle the
connector away from the port.
Figure 3-13: Removing a Pull-Type Connector
2.
1.
3.