Cisco SFS 7008 User Manual

Page 95

Advertising
background image

95

2. Enter the diag fan <id> command.

Example

3. Use the show diag fan command to show the progress of the test.

Example

Topspin-270# config
Topspin-270(config)# diag fan 1
Topspin-270(config-diag-fan-1)# test self-test
Topspin-270(config-diag-fan-1)# start
Topspin-270(config-diag-fan-1)# exit
Topspin-270(config)# exit
Topspin-270# show diag fan
=============================================================================
Diagnostic Tests For Fan
=============================================================================
module-type : fan
module-number : 1
test : self-test
iterations : 1
action : start
result : in-progress
percentage-completed : 70
result-string : Self Test, Current report : In progress...
Topspin-270#

Topspin-270(config-diag-fan-1)# exit
Topspin-270(config)# exit
Topspin-270# show diag fan
=============================================================================
Diagnostic Tests For Fan
=============================================================================
module-type : fan
module-number : 1
test : self-test
iterations : 1
action : start
result : in-progress
percentage-completed : 70
result-string : Self Test, Current report : In progress...
Topspin-270#

Advertising