Installing a replacement chassis id module – Cisco SFS 7008 User Manual
Page 52
Advertising
52
Installing a Replacement Chassis ID Module
1. Remove the new Chassis ID module from the package.
2. Ground yourself appropriately.
3. Remove the old Chassis ID module, if you have not already done so. Refer to
if a Chassis ID module is still in place.
4. Align the chassis ID module with the slot and push the module completely into the bay.
5. Use the LEDs to verify the status of the module. Refer to
.
The new Chassis ID has been previously serialized with the information that is unique to your
chassis.
6. Reboot the chassis by using the GUI, or by using the reload command.
Example
Topspin-270# reload
System configuration has been modified. Save?
[yes (default)/no/*.cfg] yes
Proceed with reload? [confirm]
Topspin-270#
Connection to host lost.
#
Advertising