Canon RS-CL07 - Manual (Page 14)


/
● Use an optional extension pipe (RS-CL08/RS-CL09) according to the ceiling height. For details, contact our
local agent.
RS-CL0/RS-CL0 Assembly/Installation Manual
Canon Ceiling-mount Hanger
Ceiling-mount bracket and Joint fitting
Ceiling-mount bracket
RS-CL07
M5 screws (12 mm/0.5") : 4 pcs.
M4 screws (10 mm/0.4") : 6 pcs.
Anti-fall wires: 2 pcs.
Canon logo seal: 2 sht.
Template sheet for a ceiling-mount hole: 1 sht.
RS-CL10
M5 screws (12 mm/0.5") : 4 pcs.
M4 screws (10 mm/0.4") : 5 pcs.
Anti-fall wire (short) : 1 pc.
Anti-fall wire (long) : 1 pc.
Canon logo seal: 1sht.
Template sheet for ceiling mount hole: 1 sht.
Supplied Parts
Extension pipe RS-CL08/RS-CL09 (option)
Parts Lineup
● Ask an expert builder to install the Ceiling-mount Hanger.
● The Ceiling-mount Hanger RS-CL07/RS-CL10 can be used exclusively for Canon projectors
(models listed above). It cannot be used for any other equipment. Do not place/hang any other
objects on/from this Ceiling-mount Hanger. Do not let children hang from it.
● Assemble and install this Ceiling-mount Hanger correctly in accordance with this manual.
● Make sure to tighten screws securely. Do not remodel any part.
● For details on cautions on using the projector, refer to the User's Manual that came with the projector.
Applicable projector models RS-CL07：WUX10 MarkII/SX7 MarkII/SX60/X700
RS-CL10：SX80 MarkII/SX800
The Ceiling-mount Hanger is used to secure the projector to the ceiling.
RS-CL07 RS-CL10
Weight: RS-CL07 (3.7 kg/8.2 lbs)/RS-CL10 (4.1 kg/9.1 lbs)
Weight: RS-CL08 (2.2 kg/4.9 lbs)/RS-CL09 (3.4 kg/7.5 lbs)
(As of December 2009)
Caution
* The Ceiling-mount bracket must
be separated from the Joint fitting,
before installation.
RS-CL09
Outer/inner pipes and outer/inner covers
M5 screw (12 mm/0.5") : 4 pcs.
M3 screw (10 mm/0.4") : 1 pc.
The length is adjustable between 55 cm/1.9'
and 95 cm/3.1' in steps of 5 cm/2".
RS-CL08
Outer/inner pipes and outer/inner covers
M5 screw (12 mm/0.5") : 4 pcs.
M3 screw (10 mm/0.4") : 1 pc.
The length is adjustable between 35 cm/1.1'
and 55 cm/1.9' in steps of 5 cm/2".
Projector weight
WUX10 MarkII: 5.0 kg/11.02 lbs SX7 MarkII/X700: 4.8 kg/10.6 lbs
SX60: 4.6 kg/10.1 lbs SX80 MarkII: 5.2 kg/11.4 lbs SX800: 5.0 kg/11.02 lbs
取付け用ネジ穴位置
SCREW HOLE POSITION
取付け用ネジ穴位置 SCREW HOLE POSITION
取付け用ネジ穴位置
SCREW HOLE POSITION
取付け用ネジ穴位置
SCREW HOLE POSITION
天板取付用型紙 TEMPLATE FOR RS‑CL10
配線用穴最大領域 CABLE HOLE MAX AREA
前方
FRONT
投写レンズ中心位置
PROJECTION LENS CENTER
Ceiling-mount bracket
Joint fitting