Removing the system from the rack – Dell POWEREDGE 2950 User Manual
Page 18
Advertising
16
Rack Installation Guide
Figure 1-7.
Installing the System in the Rack
Removing the System From the Rack
To remove the system from the rack, perform the following procedure:
1 Turn off the system and attached peripherals, and disconnect the system from the electrical outlet.
2 Remove the I/O cable connectors and power cable connectors from their respective connectors
on the system back panel.
3 Loosen the thumbscrews on each side of the front chassis panel that secures the system to the rack.
1
slide-release latch
2
shoulder screws (6)
3
J slots (6)
4
front release latch
1
2
4
3
Advertising