Cabletron Systems HSIM-F6 - Manual (Page 52)

Chapter 3: Local Management
3-28 HSIM-F6 User’s Guide
3.10.1 FDDI Translation Configuration Screen Fields
The following list describes each of the FDDI Translation Configuration
screen fields:
Translate all non-Novell FDDI SNAP Frames to
This field allows the user to translate all non-Novell FDDI SNAP frames
to a specific Ethernet frame type. The Ethernet frame types that are
available are as follows:
• Ethernet II
• Ethernet SNAP
The default setting for the non-Novell FDDI SNAP field is Ethernet II.
Translate all Ethernet Raw Frames to
This field allows the user to translate all Ethernet Raw frames to a specific
FDDI frame type. The FDDI frame types that are available are as follows:
• FDDI MAC
• FDDI SNAP
• FDDI 802.2
The default setting for the Ethernet Raw field is FDDI MAC.
Translate all Novell FDDI SNAP Frames to
This field allows the user to translate all Novell FDDI SNAP frames to a
specific Ethernet frame type. The Ethernet frame types that are available
are as follows:
• Ethernet II
• Ethernet SNAP
• Ethernet 802.3
• Ethernet 802.2
The default setting for the Novell FDDI SNAP field is Ethernet II.