Cisco Conference Phone - Manual (Page 70)

5-6
Installation and Upgrade Guide for Cisco Unified MeetingPlace Web Conferencing Release 5.3
OL-10029-01
Chapter 5 Upgrading to Cisco Unified MeetingPlace Web Conferencing Release 5.3
How to Upgrade to Cisco Unified MeetingPlace Web Conferencing Release 5.3
• Upgrade your Cisco Unified MeetingPlace 8100 series server to Cisco Unified MeetingPlace
Audio Server Release 5.3 by complete the instructions in the
Installation and Upgrade Guide for
Cisco Unified MeetingPlace Audio Server Release 5.3.
• Attach your web server to a new Cisco Unified MeetingPlace 8100 series server already loaded with
Cisco Unified MeetingPlace Audio Server Release 5.3 by completing the instructions in the
“Changing the Cisco Unified MeetingPlace Audio Server Connection” section in Chapter 2 of the
Configuration Guide for Cisco Unified MeetingPlace Web Conferencing Release 5.3.
Step 4 (Optional) Upgrade your Cisco MCS server or non-Cisco MCS server to the latest OS requirements by
doing one of the following.
• If you are using a Cisco MCS server, we recommend that you upgrade your server to the latest
Cisco MCS Server OS Release or Patch.
• If you are using a non-Cisco MCS server, we recommend that you upgrade to the latest Windows
2000 Server Service Pack and install any additional Critical Security Hotfixes, as reported by the
Windows Update utility.
Step 5 Proceed to the next task in your upgrade procedure as follows:
• For a standalone server configuration, see the “Upgrading a Standalone Web Server” section on
page 5-6 .
• For a standalone server to shared database configuration, see the “Upgrading a Standalone Web
Server to a Shared Database Configuration” section on page 5-7 .
• For a shared database configuration, see the “Upgrading Web Servers Sharing the Same Database”
section on page 5-8
Upgrading a Standalone Web Server
Caution Cisco Unified MeetingPlace Web Conferencing overwrites all customizations when upgrading from
Release 4.2.7.x or 4.3.0.x. Ensure that you back up your customizations as indicated in the upgrade
procedures if you want them available for future retrieval.
Before You Begin
• Obtain Chapter 2, “Installing Cisco Unified MeetingPlace Web Conferencing Release 5.3” to assist
you with your upgrade.
• Complete the “Preparing to Upgrade Cisco Unified MeetingPlace Web Conferencing” section on
page 5-5 .
Procedure
Step 1 Stop all Cisco Unified MeetingPlace Web Conferencing services.
a. From the Windows Service control panel, right-click Cisco MeetingPlace Web Conferencing.
b. Choose Stop.