Testing the web server over an https connection, Testing the meeting console connection – Cisco Conference Phone User Manual
Page 32
2-14
Installation and Upgrade Guide for Cisco Unified MeetingPlace Web Conferencing Release 5.3
OL-10029-01
Chapter 2 Installing Cisco Unified MeetingPlace Web Conferencing Release 5.3
How to Test the Cisco Unified MeetingPlace Web Conferencing Release 5.3 Installation
Testing the Web Server Over an HTTPS Connection
Before You Begin
Your web server only allows HTTPS traffic.
Procedure
Step 1
From the web server, use a web browser to connect to https://hostname.domain.com, where
http://hostname.domain.com is the Fully Qualified Domain Name (FQDN) of your web server.
or
If your web server is not in a Domain Name Server (DNS), use a web browser to connect to IP address
from the web server.
•
If the Cisco Unified MeetingPlace Web Conferencing home page appears, your connection is
successful.
•
If any security warning dialog boxes appear, see the
“Problems with Cisco Unified MeetingPlace
Web Conferencing Server Connections” section on page 6-3
Testing the Meeting Console Connection
Procedure
Step 1
From an end-user system, open a web browser and enter the Cisco Unified MeetingPlace
Web Conferencing URL in the address field. Click Enter.
Step 2
Sign in by using your System Manager-level user ID and password.
Step 3
From the Welcome page, click Schedule Meeting.
Step 4
From the New Meeting scheduling page, fill in your meeting details; then, click Schedule.
Step 5
Return to the Welcome page and enter the meeting ID of the meeting you just scheduled; then, click
Attend Meeting.
Step 6
Confirm that the meeting console loads properly.
Related Topics
For information about meeting console connection speeds and status, see the User Guide for Cisco
Unified MeetingPlace Web Conferencing Release 5.3.