Crestron electronic IPAC User Manual
Ipac introduction, Supplied parts
IPAC
Introduction
This document contains instructions for installing the IPAC series of wall-mounted,
Integrated Professional Automation Computers.
The IPAC is designed for installation in a standard 3-gang electrical box.
IPAC-GL1-W-T Physical View (shown in white)
Supplied Parts
The parts supplied with the IPAC are listed in the following table.
Supplied Hardware for the IPAC
DESCRIPTION PART
NUMBER
QUANTITY
Mounting Plate with Ground Wire
4506280
1
Screws, 06-32 x ¾”, Combo Head
2009211
4
Screws, 04-40 x ¼”, Pan, Phil
2007156
2
Screws, 04-40, 7/16", Pan, Phil, Blk
(for Black units)
OR
Screws, 04-40, 7/16", Pan, Phil, Zinc
(for White units)
2022900
2013409
4
Label Sheet
4505784 (Black) OR 4506570 (White)
1
Front Cover
4505711 (Black) OR 4505867 (White)
1
Crestron Electronics, Inc.
Installation Guide – DOC. 6696A
15 Volvo Drive Rockleigh, NJ 07647
(2022187)
Tel: 888.CRESTRON
12.08
Fax: 201.767.7576
Specifications subject to
www.crestron.com
change without notice.