Canon GALVANO GC-251 - Manual (Page 64)

CANON Digital Galvano Scanner System KP-1SM Series + GC-251
Users Manual 1.00
64
8. Parameters
8.1. List of Parameters
ID Parameter Name
0 CW Limit
1 CCW Limit
2 Max Velocity
3 In-position Width
4 Settling Check Time
5 In-position Overtime
6 LQ Control Gain
7 Torque Constant
8 Total Inertia
9 Current Limit
10 Encoder Periodicity
11 Sampling Time
12 Origin Clearance Timing (Head 1)
13 High-speed Serial Communication Conversion Gain
14 Origin Clearance Timing (Head 2)
15 High-speed Serial Communication Offset
16 First Digital Notch Filter Central Frequency
17 Q Value of First Digital Notch Filter
18 First Digital Notch Filter Depth
19 Second Digital Notch Filter Central Frequency
20 Second Digital Notch Filter Q Value
21 Second Digital Notch Filter Depth
22 Digital Low-pass Filter Cutoff Frequency
23 First Analog Notch Filter Central Frequency
24 Second Analog Notch Filter Central Frequency
25 Third Analog Notch Filter Central Frequency
26 Raster Scan Time
27 Raster Scan Duty Ratio
28 Raster Scan Angle
29 Internal Generation Acceleration Percentage
30 Raster Scan Interval Time
31 Raster Scan Start Position
32 Z-phase Offset
33 Acceleration Time
34 Deceleration Time
36 Out-position Width
40 Feed-forward Gain
42 Overshoot Control