Centurion Welding System User Manual
Martindale
USER INFORMATION AND INSTRUCTIONS
FOR USE & MAINTENANCE
We have made every effort to ensure that the information given in this catalogue is accurate, but
our policy of continuous product development means specifications are likely to change and such
information is for guidance only. Martindale will not accept liability for any loss, damage or
consequential loss arising from information contained herein. Your statutory rights will not be
affected.
Before using your Max helmet it is essential that you study the following instructions. Special
attention must always be given to the warnings, capabilities and maintenance requirements stated
herein, and to any labelling specific to your model.
Martindale will accept no liability for damage occurring:
5 in connection with unprofessional use and/or maintenance of the product, including use for the
purposes other than those for which it is intended
5 due to failure to observe the instructions given in this manual
5 in connection with repairs to the safety product that were not carried out by or on behalf of our
company
Martindale
Centurion Safety Products Ltd
21 Howlett Way, Thetford, Norfolk, IP24 lHZ, UK
Tel: +44(0)1842 754266 Fax: +44(0)1842 765590
EC type examination by:
BSI Product Services, Maylands Avenue, Hemel Hempstead, Herts. HP2 4SQ, UK.
(Notified body No. 0086) All Centurion products are
approved.
0086
002-001-111 (01/07)