Canon Pixma iP4300 User Manual
Page 17
13
Before Printing
z
Loading Paper in the Auto Sheet Feeder
1
Flatten the four corners of the paper before loading it.
2
Prepare to load paper.
(1) Open the Paper Support and pull out the Paper
Support Extension to support the paper.
(2) Press the Open Button to open the Paper
Output Tray.
(3) Pull out the Paper Output Tray Extension
completely.
(4) Press the Paper Feed Switch so that the Auto
Sheet Feeder lamp (A) lights.
Note
z
Align the edges of paper neatly before loading. Loading paper without aligning the edges may
cause paper jams.
z
If paper is curled, hold the opposing curled corners and gently bend them in the opposite
direction until the paper becomes completely flat. See “Paper is curled.” on page 68.
z
To avoid curling, handle paper as follows.
– Put unused paper back into the package and keep them on a level surface.
– Take out only the necessary number of sheets from the package, just before printing.
Note
When closing the Paper Output Tray Extension after
printing, lift it up slightly.
Note
You can also select the paper source with the printer
driver.
For details, refer to the Printer Driver Guide on-screen
manual.
(1)
(2)
(3)
(4)
(A)