Canon Pixma iP4300 - Manual (Page 6)

2 Before Printing
Before Printing
Turning the Printer On and Off
Turn on the printer before printing.
„ Turning on the Printer
Before turning on the printer, confirm the following.
z
The Print Head and ink tanks are set into place.
z The printer is connected to your computer (or a compatible device).
z The printer driver is installed.
1
Press the POWER button.
The POWER lamp flashes green, and changes to
steady, non-flashing light.
2
Turn on your computer.
Note
Auto Power On/Off Feature
You can set the printer to turn on and off automatically.
z
Auto Power On: Automatically turns on the printer when print data is sent from the computer.
z Auto Power Off: Automatically turns off the printer when no print data is sent for a certain interval.
Set this setting in the Maintenance sheet of the printer driver in Windows
®
, and in the Canon IJ Printer
Utility on a Macintosh ® . For setting details, refer to the Printer Driver Guide on-screen manual .
Note
If preparatory operations above are not complete, follow the Easy Setup Instructions to complete
them.
Important
If the ALARM lamp begins to flash orange, see
“ALARM Lamp Flashes Orange” on page 76.