Configure dhcp server option 150, Optional) configure dns, 3 connecting your cisco 1040 – Cisco 1040 User Manual
Page 4: Connecting your cisco 1040
Advertising
4
Configure DHCP Server Option 150
Configure your DHCP server so that option 150 returns the IP address for the TFTP server and
provides an IP address, subnet mask, default gateway, and, optionally, a DNS server for a Cisco 1040.
If you would like to configure a Cisco router as a DHCP server, see the following URL.
(Optional) Configure DNS
If you are using DNS in your network, configure DNS entries for Cisco 1040s.
3
Connecting Your Cisco 1040
Note
Be sure to read the “Regulatory Compliance and Safety Information for Your Cisco 1040”
section on page 16 before connecting your Cisco 1040.
Figure 1 shows the connections and indicators on the front panel of your Cisco 1040.
Figure 1
Cisco 1040 Cable Connections—Front Panel
10/100-1
10/100-2
POWER
141283
1
2
3
Advertising