Canon VK-64 - Manual (Page 135)

135
4
Registering
Camera
Ser
ver
and
S
etting
Recor
ding
Sc
hedule
Setting the Preset Tour
If the following warning appears, change the settings according
to the tables below.
Warning example
* The tour time shown depends on the settings.
Click Cancel to return to the setting screen.
Click OK to save the current settings.
(If you are using the Preset Setting Tool, click Save on the setting
page of the tool)
Endurance of the pan/tilt mechanism is approximately 100,000
round trips at the full range. The total tour time depends on the
combination of the movement rate, movement range, and still
time. Refer to the following tables.
Total tour time for 100,000 round trips in the pan direction
(estimated).
Example: If the movement rate (PT) is 1, still time is 30 seconds,
and movement range (angle) in the pan direction is 50
degrees, it takes approximately 9,444 hours for 100,000
round trips in the pan direction.
Note
Movement rate (PT) is 1.
Still time
Movement range in the
pan direction (angle)
0
10
20
30
50
3872
5666
7555
9444 100
3825
4722
5666
6611
150
3809
4407
5037
5666
(Unit: Time)
(sec.)
0
10
20
30
50
1983
3777
5666
7555
100
1936
2833
3777
4722
150
1920
2518
3148
3777
Movement rate (PT) is 2.
Still time
Movement range in the
pan direction (angle)
(Unit: Time)
(sec.)