Canon VK-64 - Manual (Page 248)

248
An attempt was made to start the
Viewer, however a connection to the
specified Master Storage Server
could not be established.
An attempt was made by a user
without the administrator privilege to
switch to the Configuration window.
A connection to a Storage Server
other than the Master Storage Server
failed when you accessed the
Configuration and Preferences
screen.
An attempt was made to save the
changes in the Camera Server list in
the Configuration and Preferences
screen, however a connection to the
Storage Server could not be
established.
An attempt was made to save the
changes in the Camera Server list,
however another administrator has
conducted changes.
Another administrator changed the
Master Storage Server settings while
the Camera Server list was
displayed.
An attempt was made to register a
Storage Server by specifying a loop
back host/address (“local host”,
“127.0.0.1” or
“localhostlocaldomain”).
An attempt was made to add a
Storage Server that has been already
registered.
An attempt was made to edit the
Master Storage Server.
Connection to the Master Storage
Server failed. Check the settings
and try again.
The configuration window can only
be used by administrators.
The recording settings of the
camera server cannot be configured
for this Storage Server ‘Storage
Server name’.
‘Cause of the error’
The changes cannot be saved
because it cannot be sent to
‘Storage Server name’.
The changes to the thumbnail,
location and zone were not saved
because the Master Storage Server
settings have been changed by
another administrator. Restart the
Viewer.
The Master Storage Server settings
have been changed by another
administrator. Restart the Viewer.
This host name or IP address
cannot be specified.
This Storage Server is already
registered. Check the settings and
try again.
The Master Storage Server cannot
be changed here.
Starting the
Viewer
Configuration
and Preferences
screen
Adding/Editing/
Deleting the
Storage Server
List of Messages
Messages Cause
Error Messages of Viewer
The ‘ ’ part of the message differs depending on the situation.