Canon VK-64 - Manual (Page 48)

Storage Server Configuration Dialog
48
●
Event Notification Tab
The Storage Server Configuration dialog, Event Notification tab allows you to
configure.
E-mails are sent according to the priorities set in the Events tab.
Example event notification e-mail
An event of priority 3 occurred on 12/05/2006 at 15:15:17 +1000.
Parking Lot 1: Sensor on
Enable e-mail notification and select
a priority. Events of that priority and
above will lead to notification e-
mails.
Enter the e-mail subject line, for
example, “Immediate Action
Required”. Enter the address of the
recipient and enter your from
address.
Enter a Host Name or IP address
and Port Number of mail server for
outgoing mail.
Enable authentication (POP-before-
SMTP) for connection and enter
User Name, Password and POP
Server details.
If this is enabled, the Storage
Server will attempt to perform a
POP login before sending e-mail
that may be required for some
SMTP servers.
You can only register one e-mail address in the To Address field.
If you want to send the e-mail to multiple addresses, use a group
address.
Tip