Canon VK-64 - Manual (Page 67)

67
3
Stora
g
e
S
er
ver
Configuration
Ref
erence
Setting the User Management Tab
How to Set the User Management Tab
●
Add a User
Click Add on the User Management tab.
The Add User dialog appears.
Enter the user’s User Name (up to 20 characters, including alphanumeric letters
and underscore “_”).
Enter the user’s User Name (up to 20 characters, including alphanumeric letters
and underscore “_”). The Confirm Password field will become active. Re-enter
the new password.
Click OK.
The dialog closes and the new user is displayed in the User List.
Changing User to Administrator
Check the Administrator option of a user in the User List to enable the user to
have the Administrator privileges. Do not check the option if you do not want to
enable the user to have the Administrator privileges.
Click Apply to save changes.
●
Change User Password
Click to select a user to change the password in the User List.
Click Edit below the user list to bring up the Edit User dialog.
Enter the user’s User Name (up to 20 characters, including alphanumeric letters
and underscore “_”). The Confirm Password field will become active. Re-enter
the new password.
Click OK.
The new password is saved.
4
3
2
1
2
1
4
3
2
1
The VK-64/VK-16 Administrator status is independent of the
Windows Administrator status.
Note