Canon VK-64 - Manual (Page 73)

Launching the VK Viewer and Displaying the Configuration and Preferences Screen
73
4
Registering
Camera
Ser
ver
and
S
etting
Recor
ding
Sc
hedule
Specify the IP address of Storage Server to connect Viewer
If you installed the Viewer and Storage Server on separate PC, specify an IP address of
Storage Server and connect Viewer to the Storage Server.
Select Use IP address from
the drop-down menu.
Click Connect.
Enter the IP address or host
name of the Master Storage
Server in Host Name or IP,
and the port number in Port.
Click Connect.
Enter your User Name and
Password, and click Login.
5
4
3
2
1
The dialog for entering the IP address will also be shown even
when connection to the Storage Server failed.
Tip
If you need to use a proxy server, you need to change the
Internet option settings in the following procedure:
1. Select Start > Control Panel > Internet Option.
2. Select the Connection tab.
3. Click LAN settings ….
Change the proxy server settings.
If using a proxy server between a Viewer and a Storage Server,
it should be one which does not perform response buffering.
Proxies which are configured to perform response buffering
may lead to delays in sending small amounts of data (such as
events) from the Storage Server to the Viewer. You cannot use
the Apache proxy server since it perform response buffering.
You cannot transmit or receive audio when using a proxy
server.
Note