Editing the storage server – Canon VK-64 User Manual
Page 83
83
4
Registering
Camera
Ser
ver
and
S
etting
Recor
ding
Sc
hedule
Adding the Storage Server
Editing the Storage Server
In the Storage and Camera Server Summary, select the Storage Servers tab.
A list of Storage Servers already added are displayed.
Double-click the Storage Server in
the list.
Alternatively, select the Storage
Server and click Edit.
This will bring up the Edit Storage
Server dialog.
Enter connection settings and click
OK.
3
2
1
To save changes, click
Save Changes at the
bottom right-hand corner
of the Camera Summary
window.
Click Discard Changes
to cancel any changes
you have made.
4
Do not add the same Storage Server more than once.
If you add a Storage Server with a different configuration
(such as one managed by another Master Storage Server),
your original Locations and Zones will be lost.
If you are using Windows XP SP2 or Windows Server 2003,
you need to change Windows settings. Refer to “Notes on
Operating Environment” (
➝ P. 24).
Do not change the port number.
Note
This function lets you change the network address used to
access a particular Storage Server in case the IP address has
changed.
The Master Storage Server cannot be edited.
Note