Chicago Electric 1.5HP 7" Bridge Tile Saw 98265 - Manual (Page 11)

Page 11 For technical questions, please call 1-800-444-3353. SKU 98265
SPECIFICATIONS
Maximum Blade Diameter 7"
Arbor Hole
5/8"
Maximum Cutting Capacity 1-1/8" @ 90°
3/4" @ 45°
Tilting Head 45° Left-Tilt only
Electrical Requirements 120 V~ / 60 Hz / 10 A
Blade Rated Speed 5000 RPM
Water Pump
Maximum Flow = 160
GPH
Stand (SKU 98328) Sold separately
Note: Recommend Blades:
SKU 67047: 7” Turbo Diamond Blade (Wet or Dry)
(sold separately)
SKU 67111: 7” Diamond Wet Blade
(sold separately)
UNPACKING
When unpacking, check to make sure that
the item is intact and undamaged. If any parts
are missing or broken, please call Harbor Freight
Tools at the number shown on the cover of this
manual as soon as possible.
List of contents
Part(s) Description Qty
1 Arbor Wrench 1
2 Clamp Assembly 1
3 Miter Gauge 1
4 Socket Wrench 1
INSTRUCTIONS FOR PUTTING
INTO USE
Read the ENTIRE IMPORTANT
SAFETY INFORMATION section at
the beginning of this manual
including all text under
subheadings therein before set up
or use of this product.
TO PREVENT
SERIOUS INJURY
FROM ACCIDENTAL
OPERATION:
Turn the Power Switch of the tool
to its “OFF” position and unplug
the tool from its electrical outlet
before assembling or making any
adjustments to the tool.
Note: For additional information regarding the
parts listed in the following pages, refer
to the Assembly Diagram near the end of
this manual.
Assembly
1. Keep your work area clean and well
lit. Cluttered and dark work areas invite
accidents.
2. Do not operate power tools in ex-
plosive atmospheres, such as in the
presence of flammable liquids, gases,
or dust. Power tools create sparks
which may ignite the dust or fumes.
3. Keep bystanders, children, and visi-
tors away while operating a power
tool. Distractions can cause you to lose
control.