Figure 5, Left-side mounted cma installation (preferred), Figure 6 – Dell PowerEdge Rack Enclosure 2410 User Manual
Page 7
Advertising
Cable Routing Procedures for the Dell PowerEdge R820 System
7
Left-side mounted CMA installation (preferred)
Figure 5.
1.3.3. Right-side mounting instructions
Install the CMA on the rear right side of the rails by attaching both CMA housings to the attachment
brackets on the rails. The remaining steps are the same as for left-side mounting as described in
Section 1.3.2. See Figure 6 for an example of a completed right-side mounted CMA installation.
Right-side mounted CMA installation (CMA shown in service position)
Figure 6.
Advertising
This manual is related to the following products: