Dell POWEREDGE R610 - Manual (Page 27)

About Your System 27
E141F CPU #
protocol
error. Power
cycle AC.
The system BIOS has
reported a processor
protocol error.
Remove AC power to the
system for 10 seconds and
restart the system.
If the problem persists,
see "Getting Help."
E1420 CPU Bus
parity error.
Power cycle
AC.
The system BIOS has
reported a microprocessor
bus parity error.
Remove AC power to the
system for 10 seconds or
clear the SEL.
If the problem persists,
see "Getting Help."
E1422 CPU # machine
check error.
Power cycle
AC.
The system BIOS has
reported a machine check
error.
Remove AC power to the
system for 10 seconds and
restart the system.
If the problem persists,
see "Getting Help."
E1610 Power Supply
# (### W)
missing.
Check power
supply.
Specified power supply was
removed or is missing from
the system.
See "Troubleshooting
Power Supplies."
E1614 Power Supply
# (### W)
error. Check
power supply.
Specified power supply has
failed.
See "Troubleshooting
Power Supplies."
E1618 Predictive
failure on
Power Supply
# (### W).
Check PSU.
A power supply fan failure,
an over-temperature
condition, or power supply
communication error has
caused the predictive
warning of an impending
power supply failure.
See "Troubleshooting
Power Supplies."
Table 1-1. LCD Status Messages (continued)
Code Text Cause Corrective Actions