Dell PowerEdge R430 - Manual

Dell - Internal Use - Confidential
02 - 2013
Statement of Volatility – Dell PowerEdge R430
Dell PowerEdge R430 contains both volatile and non-volatile (NV) components. Volatile components lose their data
immediately upon removal of power from the component. Non-volatile components continue to retain their data even
after the power has been removed from the component. Components chosen as user-definable configuration options
(those not soldered to the motherboard) are not included in the Statement of Volatility. Configuration option information
(pertinent to options such as microprocessors, remote access controllers, and storage controllers) is available by
component separately. The following NV components are present in the PowerEdge R430 server.
Item
Non-Volatile or
Volatile
Quantity Reference Designator Size
Planer
PCH Internal CMOS
RAM
Non-Volatile 1
U_PCH1
256 Bytes
BIOS Password Non-Volatile 1
U_PCH1
16 bytes
BIOS SPI Flash Non-Volatile 1
U_SPI_BIOS1
16 MB
iDRAC SPI Flash Non-Volatile 1
U_IDRAC_SPI-1
4 MB
BMC EMMC Non-Volatile 1
U_EMMC1
4 GB
System CPLD RAM Volatile 1 U_CPLD1 1 KB
System Memory Volatile
Up to 8
for CPU1
Up to 4
for CPU2
CPU1: DIMM1~DIMM8,
CPU2: DIMM9~DIMM12
Up to 32GB per DIMM
(RDIMM)
Internal USB Key Non-Volatile Up to 1 N/A
Varies (not factory
installed)
CPU Volatile 1 or 2 CPU1 / CPU2 Various
iDRAC DDR Volatile 1 U_IDRAC_MEM1 256MByte
iDRAC Volatile 1 U_IDRAC1 64 kbyte + registers
LOM EEPROM Non-Volatile
2
U_LOM1_ROM
U_LOM2_ROM 8Mb
Power Supplies
PSU FW Non-Volatile 1 per PSU Varies by part number
Up to 2MB. Varies by part
number