Accessing the web page for a phone – Cisco OL-21011-01 User Manual
Page 2
8-2
Cisco Unified IP Phone Administration Guide for Cisco Unified Communications Manager 8.0 (SCCP and SIP)
OL-21011-01
Chapter 8 Monitoring the Cisco Unified IP Phone Remotely
Accessing the Web Page for a Phone
Accessing the Web Page for a Phone
To access the web page for a Cisco Unified IP Phone, perform these steps.
Note
If you cannot access the web page, it may be disabled. See
Disabling and Enabling Web Page Access,
for more information.
Procedure
Step 1
Obtain the IP address of the Cisco Unified IP Phone by using one of these methods:
•
Search for the phone in Cisco Unified Communications Manager by choosing Device > Phone.
Phones registered with Cisco Unified Communications Manager display the IP address on the Find
and List Phones window and at the top of the Phone Configuration window.
•
On the Cisco Unified IP Phone, press the Settings button, choose Network Configuration, and then
scroll to the IP Address option.
Step 2
Open a web browser and enter the following URL, where IP_address is the IP address of the
Cisco Unified IP Phone:
http://IP_address or https://IP_address (depending on the protocol supported by the Cisco Unified IP
Phone)
The web page for a Cisco Unified IP Phone includes these topics:
•
Device Information—Displays device settings and related information for the phone. For more
information, see
•
Network Configuration—Displays network configuration information and information about other
phone settings. For more information, see
Network Configuration, page 8-5
.
•
Network Statistics—Includes the following hyperlinks, which provide information about network
traffic:
–
Ethernet Information—Displays information about Ethernet traffic. For more information, see
.
–
Access (Port)—Displays information about network traffic to and from the PC port on the
phone. For more information, see
–
Network (Port)—Displays information about network traffic to and from the network port on
the phone. For more information, see
.
•
Device Logs—Includes the following hyperlinks, which provide information that you can use for
troubleshooting:
–
Console Logs—Includes hyperlinks to individual log files. For more information, see
–
Core Dumps—Includes hyperlinks to individual dump files. For more information, see
–
Status Messages—Displays up to the 10 most recent status messages that the phone has
generated since it was last powered up. For more information, see
.
–
Debug Display—Displays debug messages that might be useful to Cisco TAC if you require
assistance with troubleshooting. For more information, see