Adding and replacing parts, Before you begin, Recommended tools – Dell Latitude D630 User Manual
Page 149: Turning off your computer
Adding and Replacing Parts
149
16
Adding and Replacing Parts
Before You Begin
This chapter provides procedures for removing and installing the components in
your computer. Unless otherwise noted, each procedure assumes that the
following conditions exist:
• You have performed the steps in "Turning Off Your Computer" on page 149
and "Before Working Inside Your Computer" on page 150.
• You have read the safety information in your Dell™ Product Information
Guide.
• A component can be replaced or—if purchased separately—installed by
performing the removal procedure in reverse order.
Recommended Tools
The procedures in this document may require the following tools:
• Small flat-blade screwdriver
• Small Phillips screwdriver
• Small plastic scribe
• Flash BIOS update program CD
Turning Off Your Computer
NOTICE:
To avoid losing data, save and close any open files and exit any open
programs before you turn off your computer.
1 Shut down the operating system:
a
Save and close any open files, exit any open programs, click Start→
Shut Down→ Shut down→ ΟΚ.