Creative Labs Multimedia Speaker System 2400 - Manual

Creative Inspire 2.1
2400
Multimedia Speaker System
Safety and Regulatory Information
The following sections contain notices for various countries:
NOTICE FOR THE U.S.
FCC Part15: This equipment has been tested and found to comply with the limits for a
Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed
to provide reasonable protection against harmful interference in a residential installation.
This equipment generates, uses, and can radiate radio frequency energy and, if not
installed and used in accordance with the instructions, may cause harmful interference to
radio communications. However, this notice is not guaranteed that interference will not
occur in a particular installation. If this equipment does cause harmful interference to
radio or television reception, which can be determined by turning the equipment off and
on, the user is encouraged to try one or more of the following measures:
• Reorient or relocate the receiving antenna.
• Increase the distance between the equipment and receiver.
• Connect the equipment to an outlet on a circuit different from that to which the
receiver is connected.
• Consult the dealer or an experienced radio/TV technician.
Important Notice
The serial number for your Creative Inpsire 2.1
2400 is located on the subwoofer. Please write this
number down and keep it in a secure place.
CAUTION: To comply with the limits for the Class B digital services, pursuant to Part 15
of the FCC Rules, this device must be installed with computer equipment certified to
comply with the Class B limits.
Modifications
Any changes or modifications not expressly approved by the grantee of this device could
void the user’s authority to operate the device.
NOTICE FOR CANADA
This apparatus complies with the Class ‘B’ limits for radio interference as specified in the
Canadian Department of Communications Radio Interference Regulations.
WARNING: To prevent fire or
shock hazard, do not expose this
appliance to rain or moisture.
Quick Start Guide
Démarrage rapide
Instalación rápida
Introdução Rápida
English
LIMITED HARDWARE WARRANTY
Creative Technology Ltd (“Creative”) warrants the product enclosed herein to be
free of defects for a period of twelve (12) months from date of purchase. In the
event of a defect in material or workmanship during the warranty period,
Creative, at its sole discretion, will either repair or replace the defective product
when the defective product is returned to Creative by the owner as further
outlined herein. The remedy for this breach of warranty is limited to servicing or
replacement only and shall not cover any other damages, whatsoever.
CREATIVE SPECIFICALLY DISCLAIMS ALL OTHER WARRANTIES,
EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO IMPLIED
WARRANTIES OF MERCHANTABILITY, NON-INFRINGEMENT AND
FITNESS FOR A PARTICULAR PURPOSE. WITH RESPECT TO THE
USE OF THIS PRODUCT, IN NO EVENT SHALL CREATIVE BE LIABLE
FOR ANY LOSS OF PROFIT OR ANY COMMERCIAL DAMAGE,
INCLUDING BUT NOT LIMITED TO SPECIAL, INCIDENTAL,
CONSEQUENTIAL, OR OTHER DAMAGES. Some states/countries do not
allow exclusion of limitation of liability for consequential or incidental damages,
in which case the above limitation may not apply to you.
Creative makes final determination whether such product is defective. You must
deliver the product with a return material authorization (RMA) number and a
dated proof of purchase.
To receive an RMA number, contact Creative’s Technical Support. If Creative’s
Technical Support verifies the product is defective, the Return Material
Authorization Department will issue an RMA number to note on the outer
package of the product being returned. Creative cannot accept any product that
does not include an RMA number on the package. You must use the original
container (or the equivalent), pay any shipping charges, and assume the risk of
damage or loss in transit.
Creative may use new or reconditioned parts, and any replaced parts or product
become the property of Creative. Creative warrants the repaired or replacement
product to be free from defects in material and workmanship for the remainder of
the initial warranty period.
CUSTOMER SERVICE / TECHNICAL SUPPORT
Inside U. S. A., Canada and Latin America
Visit our online help websites for help with installation, answers to frequently
asked questions, or troubleshooting tips. Our websites hold a wealth of
information as well as up-to-the-minute software and driver upgrades.
http://www.americas.creative.com/support
For comments or questions regarding our technical support, you can also contact
us at the following address:
Creative Labs Inc.
Technical Support
1523 Cimarron Plaza
Stillwater, OK 74075
Inside Asia
Creative Technology Ltd.
To reach Technical Support via the Internet, visit our web site at
http://www.creative-asia.com/support
Technical Support
31 International Business Park
Creative Resource
Singapore 609921
Tel: 65-895-4100
Operating hours (Singapore Time):
Mon-Fri 9:00 a.m.-6:00 p.m.
Sat-Sun & Public Holidays closed
October
© 2001 Creative Technology Ltd. All rights reserved. The Creative logo and Sound Blaster are
registered trademarks and Inspire and Creative Inspire are trademarks of Creative Technology
Ltd. in the United States and/or other countries. All other brand or product names mentioned
are trademarks or registered trademarks of their respective holders and are hereby recognized
as such. All specifications are subject to change without prior notice. Use of this product is
subject to a limited warranty. Actual contents may differ slightly from those pictured.
P/N 0300000000084 Rev. B
English Français Español Português do Brasil
Important Safety
Instructions
Read and Follow Instructions
All safety and operating
instructions should be read and
followed.
Cleaning
Unplug the power supply
adapter from the wall outlet or
power source before cleaning.
Do not use liquid cleaners or
aerosol cleaners.Use a damp
cloth for cleaning.
Placement
Do not place the speaker
system on an unstable cart,
stand, tripod, bracket, or table.
The speaker may fall, causing
injury to a person, and serious
damage to the product.
Power Sources
This speaker system is
specifically designed for
operation within the electrical
range(s) specified on the
provided power adapter and
use outside of this range shall
be at your own risk.
Please contact your local
electric utility company if you
have any questions about the
electrical voltage at your
intended location of usage.
Servicing
Do not attempt to service any
part of the speaker yourself as
opening or removing covers
may expose you to dangerous
voltage or other hazards. Refer
all servicing to qualified
service personnel.
Compliance
This product conforms to the
following Council Directive:
Directive 89/336/EEC,
92/31/EEC (EMC)
73/23/EEC (LVD)
Specifications
Creative Inspire 2.1 2400
Three-Channel Amplifier
Satellite speaker:
4.5 watts RMS per channel
Subwoofer:
12 watts RMS
These specifications apply to
Creative Inspire 2.1 2400
operating from the supplied
12V DC 1.5A power adapter.
Instructions importantes
concernant la sécurité
Lire et suivre les instructions
Lisez et suivez attentivement toutes
les instructions de sécurité et
d'utilisation.
Nettoyage
Débranchez l'adaptateur de la prise
murale ou de toute autre source
électrique avant de procéder au
nettoyage de l'appareil. N'utilisez
pas de nettoyants liquides ou en
aérosol. Utilisez un chiffon humide.
Positionnement des haut-parleurs
N'installez pas le système de haut-
parleurs sur une table roulante, un
trépied, une console ou tout autre
support instable.
Le système de haut-parleurs risque
de tomber et d'être sérieusement
endommagé mais également de
blesser une personne.
Sources d'alimentation
Ce système de haut-parleurs est
spécialement conçu pour
fonctionner avec les tensions
électriques indiquées sur la prise
d'alimentation fournie. L'utilisation
de tensions non préconisées est à
votre propre risque.
Contactez votre compagnie
d'électricité pour toute question
concernant la tension électrique à
l'endroit d'utilisation prévu.
Réparation
N'essayez pas de réparer le système
de haut-parleurs vous même. Ouvrir
ou retirer les parties protectrices de
l'appareil peut vous exposer à des
composants électriques sous haute
tension ou à d'autres risques. Toute
réparation doit être effectuée par un
personnel qualifié.
Conformité
Ce produit est conforme aux
Directives du Conseil suivantes:
directive 89/336/CEE,
92/31/CEE (CEM)
73/23/CEE (LVD)
Caractéristiques
Creative Inspire 2.1 2400
Amplificateur à 3 canaux
Haut-parleur satellite:
4.5 watts RMS par canal
Caisson de basses:
12 watts RMS
Ces spécifications s'appliquent au
Creative Inspire 2.1 2400
fonctionnant via l'adaptateur
12V DC 1.5A fourni.
Instrucciones importantes
sobre seguridad
Lea y siga las instrucciones
Debe leer y seguir todas las
instrucciones sobre seguridad
y funcionamiento.
Limpieza
Antes de efectuar la limpieza,
desenchufe el adaptador de
alimentación de la toma o fuente
de alimentación. No utilice
limpiadores líquidos ni aerosoles.
Utilice un paño húmedo.
Colocación de los altovoces
No sitúe el altavoz en un carrito,
estantería, trípode, soporte o mesa
inestable.
El altavoz se podría caer y provocar
graves lesiones a las personas
y quedar seriamente dañado.
Fuentes de alimentación
Este sistema de altavoces está
especialmente diseñado para
funcionar dentro de las amplitudes
eléctricas especificadas en el
adaptador de alimentación.
El empleo de otras potencias que
estén fuera de las mencionadas
amplitudes queda a la entera
responsabilidad del usuario.
Si tiene dudas con respecto al
voltaje que le corresponde utilizar
en su lugar de residencia, consulte
a la compañía eléctrica local.
Reparaciones
No intente reparar ninguna parte
del altavoz por su cuenta. Si abre
o retira las cubiertas, se puede ver
expuesto a descargas eléctricas u
otros riesgos. Deje las reparaciones
en manos del personal de servicio
cualificado.
Compatibilidad
Este producto cumple con la
siguiente directiva:
Directiva 89/336/EEC,
92/31/EEC (EMC)
73/23/EEC (LVD)
Especificaciones
Creative Inspire 2.1 2400
Amplificador de tres canales
Altavoz satélite:
RMS de 4.5 vatios por canal
Subgrave:
RMS de 12 vatios
Estas especificaciones
corresponden a un modelo
Creative Inspire 2.1 2400 que
funcione con el adaptador de CC
de 12V y 1.5A suministrado.
Instruções importantes sobre
segurança
Leia e siga as instruções
Todas as instruções de segurança e
de operação devem ser lidas e
seguidas.
Limpeza
Desconecte o adaptador de fonte de
alimentação da tomada elétrica ou
fonte de energia antes de limpar.
Não use produtos de limpeza
líquidos ou em aerossol. Use uma
flanela umedecida para limpar.
Posicionamento do sistema de
caixas
Não coloque o sistema de caixas de
som em um carro, estante, tripé,
suporte ou mesa instável.
As caixas podem cair, machucando
pessoas e causando danos graves
ao produto.
Fontes de Alimentação
Este sistema de som foi
desenvolvido especificamente para
operação dentro da faixa elétrica
especificada no adaptador de
alimentação fornecido e a
utilização fora dessa faixa ficará
por sua conta e risco.
Entre em contato com sua
companhia elétrica se tiver dúvidas
com relação à voltagem do local de
utilização desejado.
Manutenção
Não tente você mesmo fazer
manutenção em qualquer parte das
caixas de som; a abertura ou
remoção das tampas pode expô-lo
a voltagens perigosas e outros
riscos. Qualquer manutenção deve
ser feita por pessoal qualificado.
Conformidade
Este produto está em conformidade
com a seguinte diretiva de
conselho:
Diretiva 89/336/EEC,
92/31/EEC (EMC)
73/23/EEC (LVD)
Especificações
Creative Inspire 2.1 2400
Amplificador de três canais
Caixa satélite:
4.5 watts RMS por canal
Subwoofer:
12 watts RMS
Essas especificações aplicam-se
ao Creative Inspire 2.1 2400
operando a partir do adaptador de
alimentação de 12 VCC e 1.5A
fornecido.