Cub Cadet EX3200 - Manual (Page 39)

7-6
7. OPERATING THE ENGINE
Ex2900 / 3200 Operator's Manual
Use the glow plug when the air temperature is 23°F (–5°C)
or lower.
1. Move the key switch to the GLOW position (A). Hold
the key switch in the GLOW position for no more than
20 seconds.
2. Move the key switch to the START position and start
the engine.
IMPORTANT: Avoid starter damage.
●NEVER operate the starter for more than 20 seconds. If
the engine fails to start, wait for 2 minutes before
attempting to start the engine again. If the engine still
fails to start after four unsuccessful attempts, the starter
may be not functioning. (See “17.
TROUBLESHOOTING” ).
(A) Glow position
If the user intends to operate the tractor at a temperature
lower than 0°F (–18°C), the optional engine oil heater can
be mounted to the tractor.
For information about the optional engine oil heater,
contact your local Cub Cadet Yanmar dealer.
Start up the engine according to the procedure in the
“COLD STARTING” decal attached to the tractor.
(B) “COLD STARTING” decal
2. Starting the Engine in Cold Weather
3013713a
(A)
P3013701
(B)