Cub Cadet EX3200 - Manual (Page 41)

7-8
7. OPERATING THE ENGINE
Ex2900 / 3200 Operator's Manual
IMPORTANT: Avoid engine damage.
●If the engine stalls while operating under load,
immediately restart the engine to prevent over-heating
of the engine.
1. Turn the range shift lever to the NEUTRAL
position.
(A) Range shift lever
(a) Neutral position
2. Move the Power Take Off (PTO)
engagement lever to the OFF position.
(A) Rear Power Take Off (PTO) engagement lever
(B) Mid Power Take Off (PTO) engagement lever
(option)
(a) OFF position
3. Restart the engine, and resume the
operation; or run the engine for 1 to 2
minutes at the lowest possible running
speed, and then shut down the engine.
4. Restarting a stalled Engine
3013703a
(A)
(a)
3013711
(A)
(a) (a)
(B)