CyberData RS232 User Manual

External hub, Typical installation, Cyberdata corporation

Advertising
background image

License note:

The Powered-USB controller board contains specific technology covered by a patent held by IBM Corporation. CyberData has obtained a license from IBM that

permits CyberData Corporation, among other things, to make or sell products that incorporate this technology. The license also permits these products to be

resold by an entity after they have been initially sold by CyberData.

CyberData Corporation

2555 Garden Road

Monterey, California 93940

(831) 373-2601

(831) 373-4193

www.cyberdata.net

CyberData Corporation

4-Port PoweredUSB 2.0 & RS232

External Hub

Caution: Do not connect both P1 & P2 simultaneously

Display

Scanner

Printer

RS232 Signature Capture Pad

Front

COM-B

COM-A

Back

PC Host

Typical Installation

+12V

+24V

CyberData high quality 2.0 compliant

PoweredUSB cables

http://www.cyberdata.net/products/poweredus

b/pusbcables.html

Host Connector

The Host connector is a standard USB "A" to

"B" type cable. Maximum length is 5 meters

(16.5 feet) with good quality cable.

Serial Port Specifications (

DB-9 Male)

Full Duplex TxD / RxD

Full Modem Control (RTS, CTS, DTR, DSR, DCD and RI)

Data Bits: 5, 6, 7 and 8

Parity: Odd/Even or None

Stop Bits: 1, 1.5 and 2 Stop Bits Support

Break Character Support

Parity and Frame Error Support

512 Byte Bi-Directional Data Buffer

Supports Remote Wake-up from Modem Signal

Standby Low Power Mode

Standard Baud Rates: 75bps up to 230.4Kbps

Pin# 9 is voltage configurable with overcurrent protection

DB-9M Pinout

Signal

Pin#

-DCD

RXD

TXD

-DTR

GND

-DSR

-RTS

-CTS
-RI or +5V, +12V, +24V

1
2
3
4
5
6

7
8
9

4-Port PoweredUSB 2.0 & RS232

External Hub

Features

Dell Retail Integrator compatible

Adds 2 Full-Featured RS232 ports

Adds 4 PoweredUSB ports

Translation convertor on all USB ports

One +24 volt at 2.3A

Three +12 volt at 1.5A each

Short circuit and overcurrent protected

Designed to support multi-function

printer power requirements

Peripheral power control by stand-by/wake

commands

External LED to show USB port status

Two year warranty

The CyberData PoweredUSB and RS-232
Hub enables PoweredUSB connectivity in a
standard PC configuration. This hub
solution also provides legacy serial device
connectivity via two RS232 ports allowing
you to use existing RS-232 devices until
they are ready for migration.

CyberData's hub solution is the centerpiece
of a simple migration strategy for your entire
POS environment.

Translation Technology
CyberData's USB 2.0 translation technology
allows each PoweredUSB port to
communicate to the host PC at 2.0 speeds,
even if the attached device is only USB 1.1
compliant.

Compatibility


IBM PC Windows 98SE, 2000, & XP compatible.
Apple Computer & Linux also supported.
USB Standard 2.0 is fully supported.

External Power Supply


24V, 120W power supply included.

PoweredUSB Ports

4

PoweredUSB Power Output*
(Standard)

1 @ 24V 2.3A
3 @ 12V 1.5A each

RS232 Ports

2 DB9M with power option

2 year limited

Power, link & status

FCC Class B, UL 60950-1, CE

Warranty

010845

Part Number

External LEDs

Regulatory Compliance

*All ports support standard "A" type +5V USB connection.

PoweredUSB & RS232 External Hub Specifications

Power Input

24VDC

CyberData Corporation

Innovative Concepts in Peripheral Connectivity.

CyberData Corporation

930160A

Advertising