Crimestopper Security Products EZ-91 - Manual (Page 18)

OPTIONS PROGRAMMING
11. N/A - Not used N/A – Not used
12. Yellow/Black Wire (-) (-) IGN output or (-) Anti-Grind Anti-Grind *IGN output
13. Horn Chirp Confirmation with
2 presses of Lock/Unlock ON or OFF OFF *ON
14. Unlock/Disarm with Trunk pop
activation Trunk Pop & Unlock or Trunk
Pop Only Trunk Pop &
Unlock
*Trunk Pop
Only
15. Timed Crank Mode or
Tach Monitor Timed Crank: Pre set crank
time
Tach Monitor: Use Tach Pulses Timed
Crank
*Tach
Monitor
16. Adjustable Horn Pulse 0.02 sec. Normal or 0.04
Longer Long *Normal
17 OEM Disarm/Unlock Pulse 0.75 sec. Normal or 0.5 Shorter Short *Normal
18. Starter Cranking Time
(Only when option #15 is set
for “Timed Crank”) Button #1 = 0.75 Sec.
Button #2 = 0.5 Sec.
Button #3 = 1.0 Sec.
Button #4 = 1.5 Sec. 0.75 Sec *0.5 Sec
19 Diesel Glow Plug Delay Button #1 = 10 Sec.
Button #2 = Monitor Glow plug
Button #3 = 20 Sec.
Button #4 = 30 Sec. 10 Sec. * Monitor
Glow Plug
circuit
20. Remote Start Engine Run
Time Button #1 = 12 Min.
Button #2 = 24 Min.
Button #3 = 36 Min.
Button #4 = 48 Min. 12 Min. *24 Min.
21. Smart Tachless Voltage
Adjust 80-100%
(Only when Option #1 is set
to “Tachless”) Button #1 = Decrease by 1%
increment
Button #2 = Increase by 1%
increment
Button #3 = Reset to 93%
(Default) -1% +1%
22. Option reset Button #2 Reset to
Default
18