Cooling shroud, Removing the cooling shroud – Dell PowerEdge T110 User Manual

Page 73

Advertising
background image

Installing System Components

73

2 Close the system. See "Closing the System" on page 58.

Cooling Shroud

The cooling shroud directs airflow over the system processor and memory
modules.

WARNING:

The memory modules and heat sink can get very hot during normal

operation. Ensure that the memory modules and heat sink have had sufficient time
to cool before you touch them.

CAUTION:

Many repairs may only be done by a certified service technician. You

should only perform troubleshooting and simple repairs as authorized in your
product documentation, or as directed by the online or telephone service and
support team. Damage due to servicing that is not authorized by Dell is not covered
by your warranty. Read and follow the safety instructions that came with the
product.

CAUTION:

Never operate your system with the cooling shroud removed.

Overheating of the system can develop quickly, resulting in shutdown of the
system and loss of data.

Removing the Cooling Shroud

1 Turn off the system and attached peripherals. Disconnect the system from

the electrical outlet and peripherals.

2 Open the system. See "Opening the System" on page 57.
3 Remove the expansion card stabilizer. See "Removing the Expansion Card

Stabilizer" on page 72.

4 Hold the touch points on the cooling shroud and lift the cooling shroud

out of the system. See Figure 3-12.

Mayzie_HOM.book Page 73 Monday, August 31, 2009 9:33 PM

Advertising