Prepare the pvr for interactive tv, Before you begin, Overview – Cisco 8455dvb User Manual
Page 21: Insert the smartcard, Chip (insert this side down)
19
V
O
L
U
M
E
Z
E
N
D
E
R
tv
menu
opnemen
CISCO 8455DVB
T13632
T13633
Chip
(Insert this side down)
Prepare the PVR for Interactive TV
Before You Begin
Attention: Before you start the installation of the Cisco 8455DVB PVR, you must fi rst complete the
steps in the “Installatie Hoofdaansluiting Interactieve Televisie.”
Warning: Electric shock hazard. Unplug all electronic devices before connecting or
disconnecting any device cables to the PVR.
Overview
Complete the following steps to prepare and activate the PVR for Interactive TV and you will soon be
enjoying high-quality programming using the Cisco 8455DVB HD PVR.
1. Insert the smartcard into the front of the PVR.
2. Connect the PVR to your TV.
3. Prepare the PVR by entering your account information.
4. Customize the language settings.
5. Customize the PVR settings.
6. Set the audio and video formats.
7. Set the Parental Control PIN.
8. Programme the remote control to operate your TV (optional).
9. Enjoy using the PVR to watch and record your favourite shows.
Insert the Smartcard
When you purchased the PVR you should also have purchased a smartcard. The smartcard is necessary
to operate the PVR.
1. Insert the smartcard into the front of the PVR with the chip side down.
2. Once inserted, do not remove the smartcard.
Tip: The PVR will not operate without the smartcard.