Clarion UNGO MS3001 - Manual (Page 22)

Page 20 - MS3001 / MS3200 Installation Manual
The optional DLRM is a factory door lock integration module with built-in relays for use with high
current positive trigger door locking systems (like those found on some older GM models) and
voltage reversal door locking systems (also known as 5-wire systems, found on many Ford
vehicles and some GM models). The DLRM can also be used with aftermarket actuators for
vehicles not equipped with power door locks. Some late model Chrysler, Ford, and Mazda
vehicles use lower voltage systems requiring the use of resistors. For details on integration with
these systems, please call the Ungo dealer technical support hotline.
DLRM Wiring Description:
Installation:
Connect the small Green wire from the DLRM to the White/green wire (pin 9) from the alarm.
Connect the small Blue wire from the DLRM to the White/blue wire (pin 10) from the alarm.
Connect the small Red wire to Red wire (pin 2) from the alarm.
Optional DLRM - Door Lock Relay Module
Black Chassis Ground
Red +12v
White/blue
White/green
7A
10A
Green
Red
Blue
5-pin Harness
White Lock #87a normally closed
Green Lock #30 common
Blue Unlock #30 normally closed
Brown Unlock 87a common
Violet Lock & Unlock #87 normally open
3-pin Harness
Green Lock (-) trigger
Red +12V input
Blue Unlock (-) trigger
See
DLRM Wiring Diagrams
install_MS3001.qxd 8/11/99 4:15 PM Page 20