Cisco Cisco Small Business Pro IP Phones SPA 525G User Manual
Page 100
Using the Cisco SPA 500S Attendant Console
Connecting the Cisco SPA 500S Attendant Console to the Cisco SPA 525G IP Phone
Cisco Small Business Pro IP Phone SPA 525G User Guide
97
6
STEP 4
Using the attachment arm screw, secure the attachment arm to the first Cisco SPA
500S.
STEP 5
Insert the pegs on the attachment arm into the peg holes on the Cisco SPA 500S.
STEP 6
Using the attachment arm screw, secure the attachment arm to the second Cisco
SPA 500S.
!
CAUTION
Do not plug a telephone line cord into the AUX port. Use only the auxiliary cable
provided with the Cisco SPA 500S.
STEP 7
Locate the AUX OUT port on the back of the first Cisco SPA 500S. Connect one
end of the auxiliary cable to this port.
STEP 8
Locate the AUX IN port on the back of the second Cisco SPA 500S. Connect the
other end of the auxiliary cable to this port.
STEP 9
Route the auxiliary cable inside the cable slot. The Cisco SPA 500S is powered by
the auxiliary cable with the Cisco SPA 525G; no additional power source is
required.
STEP 10
Attach the appropriate desktop stands to each unit.