Connecting bluetooth headsets, Step 1 press the setup button, Step 2 select user preferences – Cisco Cisco Small Business Pro IP Phones SPA 525G User Manual
Page 20: Step 3 select bluetooth configuration, Step 5 press save, Step 2 press scan to scan for your headset
Getting Started
Using Phone Hardware and Accessories
Cisco Small Business Pro IP Phone SPA 525G (SIP) User Guide
17
1
•
For wired headsets: Connect the 2.5mm connector from the headset into the
headset port on the right side of the IP phone as shown in the following
graphic:
Connecting Bluetooth Headsets
Your phone is Bluetooth compatible and works with Bluetooth devices such as
headsets.
To configure the phone to work with your headset, first enable Bluetooth:
STEP 1
Press the Setup button.
STEP 2
Select User Preferences.
STEP 3
Select Bluetooth Configuration.
STEP 4
With Bluetooth selected, press the Right Arrow key to turn Bluetooth
On
.
STEP 5
Press Save.
After enabling Bluetooth, create a profile for your headset:
STEP 1
In the Bluetooth Configuration screen, scroll to Bluetooth Profiles. Press the Right
Arrow key to enter the profile screen.
STEP 2
Press Scan to scan for your headset.
STEP 3
In the list of found devices, select your headset and press the Select button to edit
the profile.