Cisco Cisco Small Business Pro IP Phones SPA 525G - Manual (Page 48)

Using Basic Phone Functions
Setting Do Not Disturb
Cisco Small Business Pro IP Phone SPA 525G (SIP) User Guide 45
3
Forwarding Calls When You Don’t Answer the Phone
STEP 1 In the Call Preferences screen, scroll to Forward No Ans Number.
STEP 2 Enter “vm” for voice mail, or a number to which to forward all calls; for example,
another extension, or an outside line. If forwarding calls to an outside line, be sure
to enter any access and area codes required.
STEP 3 Press Save.
Delaying Call Forwarding When You Don’t Answer the Phone
STEP 1 In the Call Preferences screen, scroll to Forward No Ans Delay.
STEP 2 Enter the number of seconds to delay forwarding calls, if there is no answer at your
phone.
STEP 3 Press Save.
Stopping Call Forwarding
To stop forwarding calls:
STEP 1 Under Call Forwarding , press the Right Arrow key to turn call forwarding Off.
STEP 2 Press the Save softkey.
Setting Do Not Disturb
Use the Do Not Disturb feature to prevent incoming calls from ringing your phone.
If you have voice mail configured, incoming callers immediately reach voice mail. If
voice mail is not configured, callers hear a busy signal or message.
You can also set Do Not Disturb from your PC using the IP Phone Web Interface;
see the
”Setting Do Not Disturb” section on page 83 .