Cisco Cisco Small Business Pro IP Phones SPA 525G - Manual (Page 51)

Using Basic Phone Functions
Parking a Call
Cisco Small Business Pro IP Phone SPA 525G (SIP) User Guide 48
3
Parking a Call
You can “park” a call on a designated line so that another person in your company
can pick up the call. The call is active until it is “unparked” or the caller hangs up.
NOTE Not all phone systems support call park. If this feature is not working, check with
your system administrator.
To park a call:
STEP 1 While on an active call, press the Park button.
STEP 2 Enter a number to identify the park line and press Dial. The park line number does
not correspond with an actual phone extension number. You can pick any easily-
remembered number. The call is then parked on that line, and the caller hears “on
hold” music or messages.
STEP 3 You or another person must then “unpark” the call.
To unpark a call, you can either use the Unpark button (if you know the park line
number), or view a list of parked calls and unpark it from the list.
To unpark if you know the park line number:
STEP 1 Press the Unpark button.
STEP 2 Enter the number identifier of the park line (for example, the number that was
entered in Step 2 of “parking a call.”)
STEP 3 Press Dial. The call is picked up on your phone.