Cisco WIRELESS-G WBP54G User Manual

Page 18

Advertising
background image

13

Chapter 4: Setting Up and Connecting the Wireless-G Bridge for Phone Adapters
Running the Setup Wizard

Wireless-G Bridge for Phone Adapters

10. The new settings will be displayed. Review them before you proceed. Click Next to save your new settings, or

click Back to return to the previous screen.

11. The Bridge will attempt to connect to the wireless network using the new settings.

Make sure the Bridge’s Wireless LED is solidly lit or flashing. This indicates that the Bridge has connected to
the wireless network. If the attempt succeeds, proceed to step 12.

If the attempt fails, you have two options offered by a pop-up screen. Click the Yes button to save the new
settings and proceed, or click the No button to return to the Choose a Wireless Network screen and
reconfigure the settings.

12. Disconnect the Ethernet network cable of the Bridge from the router or PC.

Click Next to proceed, or click Back to return to the previous screen.

Figure 4-13: Confirmation Screen

Figure 4-15: Disconnect the Network Cable from the

Router Screen

Figure 4-14: If the Bridge Does Not Connect... Screen

Advertising